CamelBak SquadBak 6.6gals/ 25L Omega Coyote

Camelbak Squadbak Hydration Pack - Coyote

Provides easy transport of 6.6 gallons of water into even the most remote locations.

Includes an 845 oz (25 L) OMEGA® Water Beast™ Reservoir with 2 HydroLink Exit Ports and 1/2" dia. fill hose

25-litre Water Beast™ Reservoir quickly backfills up to 3 CamelBak® Hydration systems at a time with 1/2" diameter, large-guage hose compatible with most military water systems. HydroGuard™ inhibits the growth of bacteria that can cause odors, discoloration or deterioration of the reservoir and tube surfaces. (Does not protect user against disease-causing organisms. Always wash reservoir after use.)

Features

• Drinking tubes connect via two HydroLink™ spigots located at the base of the SquadBak™
• Collapses for convenient storage when your mission is over and the system is empty

Dimensions

• 25 in x 19 in x 2 in (63.5 cm x 48.5 cm x 5 cm)

CamelBak® Got Your Bak™ Guarantee: If we built it, we'll Bak it™ with our lifetime guarantee.

Specifications

• Hydration Capacity: 845 oz / 25 L
• Total Capacity: 1525 cu in / 25 L
• Total Weight (Pack and Reservoir): 2.38 lbs / 1.08 kg
• Dimensions: 25 x 19 x 2 in / 635 x 485 x 50 mm
• Torso Length: 19.7 in / 50 cm
• Fabric:
• 1000D Cordura® Fabric front, back, shoulder strap front, reservoir exit port flap cover, crossbar panel
• Nylon 420D HD reservoir opening edge binding, shoulder strap binding, back panel
• EVA 10mm shoulder strap padding
• 3-5mm PE Sponge Insulation

Product Care

Pack Cleaning

We recommend wiping your pack with a damp cloth to remove dirt. If the pack is extremely dirty and needs a deeper cleaning, soak it in cool or warm water with a very mild soap. Rinse the pack thoroughly with cool water. If soap residue remains in the fabric, it may create suds if exposed to water or sweat.

DO NOT wash your pack in a washing machine. Machine washing may damage the pack or affect the integrity of the fabric and fasteners, and will void the Got Your Bak™ Guarantee.

Reservoir Cleaning

The best way to care for your reservoir is to clean and dry it after every use, especially if you fill the reservoir with anything other than water. However, if a reservoir has not been cleaned after every use, and mold or discoloration develops:

1. Use hot water and a CamelBak Cleaning Tablet. (Or use 2 tablespoons of baking soda or bleach instead of CamelBak Cleaning Tab.) Mix the solution inside your reservoir and elevate the reservoir above the tube and Big Bite Valve. Pinch the bite valve, allowing the solution to flow into the drink tube and fill the bite valve.
2. Let the reservoir and cleaning solution sit in the reservoir and drink tube for about 30 minutes.
3. Wash the reservoir with hot water and mild soap. Be sure to completely rinse away the cleaning solution in the reservoir and drink tube before using again. You can also use CamelBak brushes from our Cleaning Kit to scrub your reservoir and drink tube. Brushes are the best way to ensure you are scrubbing all of the areas of the reservoir clean.
4. Once the reservoir is clean, be sure to air dry overnight so no moisture is trapped inside, which can cause mold to grow.

These steps will make your reservoir safe for use. If there are still spots left behind, these are permanent mold stains that may not be removable. However, your reservoir is still safe and usable after you’ve cleaned it.